RDX-508 conventional x-ray crawler

Chinese Ronghua factory manufactures conventional X-Ray pipeline ndt crawler. RDX-508 X-Ray Pipeline Crawler is to test 20″-55″ diameter pipeline in NDT.

Features

  1. Operation saftey measures: Have various fault code for checking;
  2. Motor for driving: Step motor: keep constant speed in climbing slop, walking in flat road and declimbing slop, which lead accuracy in positioning;
  3. Synchronous belt: Ronghua pipeline crawler has such belt set on machine;
  4. Power consuming for four driving: Four drive principle: use one step motor to complete four driving, so they are assured synchronous, thus during climbing, the power consume is slow, so our motor will not have fault;
  5. Universality of high voltage coil: Ronghua’s high voltage coils are universally applied to generators;
  6. Inverter: Ronghua’s inverter is not easy to burn;
  7. Control Mode: Constant voltage and constant current control, which lead  quality of darkness uniformity showing on film;
  8. High voltage coil: For same kv voltage generator, any company’s high voltage coil can be fixed in our generator, very convenient and economic for buyer’s usage.

Specifications

General DescriptionDetailed ItemTech Data
Working ConditionOperating Temperature-25°~70°
Operating Humidity<90%
Crawler BodyCrawler Speed10-12 m/min
Round-Trip Distance8000m
Applicable Pipe diamete20″-55"
Positioning Accuracy± 2mm
Gradability35°
Turning Radius7D
Motor Power120V700W
Positioning MethodMagnetic Controller
Positioning  Thickness30mm
Motor Modefour wheels
Motor Battery Capacity(Li)142V,32AH
Exposure Battery Capacity (Li)142V,32AH
X Ray GeneratorX-Ray Generator Max. Voltageset voltage according to tube-wall thickness
Max Tube Current set current between 3-4.5mA according to tube-wall thickness from
Focal spot size0.5×4.0mm
Max Penetration Thickness(A3 steel)30mm
continuous Exposure Time1-300s
Total Exposure Time 90 min.
Radiation Angle40°×360°

Get a quote for this now:

    Post Author: yaorong